Sunday 16 August 2015

The V1-F1A is dead. Long live the V2-F1A...

The news many people have been waiting for

It was a long journey, but finally the adapter is now ready. My CNC project, a machine necessary to make the adapters, is almost done, but ready enough to enable me to use it to make the adapters again, in better quality than before. I will keep the manufacturing volume fairly low because this is only a hobby activity for me so I have no possibilities to build up a large stock, but never the less, the adapter is available now again.

The new version does not look 100% identical to the V1-F1A, which is why I changed the name to V2-F1A. The design is changed to improve and eliminate the issues I had with the first version. The necessary changes does not mean change in functionality, only in looks.

 


The major changes are that the white knob is gone and that there is a 'glide guide' at the sides of the contact surface to improve accuracy for the tiny contact pin which triggers the flash. The contact surface is milled so that there is a slope which helps in guiding the contact, as well as the attaching of the adapter to the camera. It also increases the stability of the adapter when the adapter is fitted to the camera.


The white knob is gone for several reasons. In V1-F1A the knob gave the impression of a proper locking mechanism, which it was not, it was just meant as a GND contact for the trigger. Now, in the new version that is solved with a spring loaded ball contact at the bottom, just like the center contact in any other, traditional flash.


Some information about this adapter

The V2 in the name of V2-F1A has nothing to do with the Nikon 1 V2 camera model, it is just a version indicator, V1-F1A was version 1 and V2-F1A is version 2 of the functionally same adapter.

This adapter is designed to be used as a flash adapter on Nikon V1 (or equivalent) camera models. It will allow the user to attach a small standard flash unit with a maximum weight of 120 g (4.2 oz), including batteries. A cable or a radio trigger must be used if the user wishes to use heavier flashes. By not complying with this, the adapter or the camera may get damaged due to the weight and the forces involved. 

The hotshoe can be used to support a radio trigger. If you wish to trigger a heavier flash and don't have a radio trigger, you can use the PC contact on the side of the adapter to attach the flash to the adapter. TTL is not supported; you must use the flash in manual or in Auto mode if the flash you are using has that mode. Most flashes, but far from all, have a thyristor automatic mode; check out the manual of your flash. As an example, the Nikon SB-300 and SB-400 don't have this mode, so they can only be used in full manual mode with this adapter. As another example, the Nikon SB900 has this mode and can be used with the adapter but still not in iTTL mode.

Type of flashes the V2-F1A can be used with

Use the V2-F1A only with flashes which are designed to be used on digital cameras. Don't take a chance with any old flash because you may cause irreparable damage to your camera, or in the best case, to the adapter. Old flashes can have several hundred Volts high trigger voltage, which would be directly hazardous on the Nikon 1 cameras, not only for the camera, but also for the users of the camera. These cameras are not made for those types of old flashes, so make sure you know your flash well. The adapter has a built in protection diode, but don't take chances, the protection diode is not a 100% warranty against far too high trigger voltages.

I have previously written about how to measure trigger voltage in case you feel confident about doing it on you own, read this article before you start.

http://adapting-camera.blogspot.se/2013/04/beware-of-flash-trigger-voltage.html

How to order


If you are interested, please send me a mail using the contact information below. Please don't pay in advance before I confirmed that I have an adapter reserved for you.





After I received payment, I will need one work day to pack it and to ship it to you, using registered, traceable post. I will use the Swedish Post and will charge you what they are charging me.





Please note that I will only sell this unit to buyers from Australia,  the Canada, USA, New Zealand, countries of European Union, Norway, Switzerland, Iceland, Liechtenstein, Jersey, Guernsey, Monaco, Aland, South Africa, Namibia, Botswana, Swaziland, Lesotho and Japan. Note that I make no exceptions made from this list.



Contact information

adapting(dot)camera at gmail(dot)com

Please note: the mail address above must be modified by you. You must replace the (dot) with real dots, the spaces before and after 'at' must be removed and the word 'at' must be replaced by @ sign. This is done to prevent internet robots from sending me spam mail. After your modification the mail address will look like: axxxxxxx.cyyyyy@gmail.com


Price and payment


I accept payments in EUR, USD or SEK only, no other currency. Payments must be made through PayPal, no direct money transfer, checks or any other means are accepted. You are paying the PayPal fee, payments without the fee will not be accepted. Currently the PayPal fee is an additional 3.4% + a fixed small sum on top of of the total costs. Shipping and handling costs will be added, this cost is not possible for me to predict, I will charge you what the Swedish Post charges me, which at this moment is 13 EUR or 15 USD for shipments outside Sweden. I will ship with registered, traceable post only.

The price for each unit is 84 EUR, 92 USD or 785 SEK, whichever you prefer. The price may change as exchange rates are changing. This price excludes the shipping and handling, the total price will be calculated when I have your personal data.

Prices and the terms are non-negotiable, if you think this is not acceptable for you or you think the price is too high, please don't buy it.


A final note about the V2-F1A

This is a do-it-yourself product. No warranty is given, other than that I guaranty I tested the flash adapter, not only before shipping it, but also during each stage the manufacturing process, and I guaranty that it is working on my Nikon V1 when I ship it. I have no possibilities to test it on the Nikon V2, V3 or any other future models since I only have the V1.


Please note also that the manufacturing marks and scratches on the adapter are the results of DIY manufacturing using a CNC mill. The marks and scratches are not defects and will not affect the functionality.

Remember also that a deal is a deal, if you bought it it is yours. I will NOT take it back, not even for a reduced price. This may sound harsh, but I have bad experience and this is the "lessons learned" from that experience. It is up to you to decide to buy it, and if the conditions are not acceptable, please don't buy this adapter.

The V2-F1A is now replaced by the V3-F1A


This is the latest, perhaps the last version. The differences between the V2-F1A and the V3-F1A are mainly aesthetic and are due to the fact that I made a major upgrade of my CNC and as a result I can make nicer adapters, slightly different in looks. The functionality is the same as before, no iTTL, only manual flash is possible. Read about the details in this post:

https://adapting-camera.blogspot.se/2017/08/the-next-generation-of-nikon-1-flash.html


WARNING:

Apparently there are some false rumors created on the internet, at this moment I won't mention which site, saying that the latest firmware of Nikon 1 V1 camera, which is 1.40 at the moment, prevents the camera from triggering a non-Nikon flash. This "information" is a lie created by persons who have no clue, the adapter works fine even with the latest firmware. I keep my camera gear up to date to make sure I test everything with the firmware the equipment is recommended to be used with by Nikon. In other words, at this moment every firmware release works with this adapter and I honestly don't expect Nikon to ever create one which would stop this adapter from functioning on your camera, at least not until they start selling original Nikon flash adapters.

Please note that the images are click-able. If you are interested in seeing more detail, just click on the images and larger ones will become visible for you.

22 comments:

  1. Yea! And congratulations. I've been following this blog for some time and am very interested in purchasing one of the adapters for my V1.

    I live in the U.S. and from your notes it appears that the pricing is $91 for the adapter and $14 for the postage and handling. Not sure what the amount of the PayPal fee would be; however, that is not an issue. When you have moment, contact me and let me know the next step(s) in the process.
    Regards,
    David Z.

    ReplyDelete
    Replies
    1. Thank you for your kind words. I sent you a mail about the details, but yes, price to U.S. at the moment is 91 + 14 USD.

      Delete
  2. Hello! I am interested in purchasing your adapter. How can I contact you to put in an order?
    Thank you

    ReplyDelete
    Replies
    1. Hi,
      I am sorry, I forgot to add the "Contact information" part, but now it is updated.

      Delete
  3. Hi! I am interested in buy this. How can I do. Thanks for the info.

    ReplyDelete
    Replies
    1. Hi,

      Thank you for your interest. Please read under "How to order" in the above article. In short, send me a mail to adapting(dot)camera@gmail(dot)com with your own mail address and I'll tell you more details there.
      Thank you.

      Delete
  4. Any Chance of shipping to INDIA ?

    ReplyDelete
    Replies
    1. Hi,
      Thank you for your interest but I am not shipping to any other country than the ones on my list. Sorry for this.

      Delete
  5. Is there any chance you would consider adding Japan to your list of countries? Super safe place to sell/ship to and probably more Nikon 1 users here than anywhere else in the world.

    ReplyDelete
    Replies
    1. Hi Ian,
      You are right, it was just a mistake of me to leave Japan out. As long as I don't have to use Japanese signs and answer questions in Japanese... :)

      Delete
  6. Hi I have tried to contact you many times but the mail is rejected each time

    ReplyDelete
    Replies
    1. Sorry, I don't know what is wrong, you must have a problem on your side. Perhaps your mail address is associated with something which filtered out, like spam, malware, virus or something else. Try a different mail address, you can register your real name and use that. Never heard of anyone having problems with sending mail to me, except when they misread the instructions above, under "How to order". Perhaps that is the problem, I don't know. I think the instructions above are quite simple and clear. Sorry if this is no help. Good luck.

      Delete
  7. Hi I am desperately trying to contact you to purchase a V1-F1A mal8830@gmail.com

    ReplyDelete
    Replies
    1. Hi,

      Thank you for your interest. Please read under "How to order" in the above article. In short, send me a mail to adapting(dot)camera@gmail(dot)com with your own mail address and I'll tell you more details there. Remove(dot)and replace with a dot.

      Thank you.

      Delete
  8. Nice to see you've continued the developing of your flash adapter!

    ReplyDelete
    Replies
    1. Thank you. I will continue as long as there is interest, at least for a while. I am also constantly improving the machine it is made on, my DIY CNC.

      Delete
  9. Hi I lived in Hong Kong and like to buy a V2-F1A adapter. Can you email me the price and shipping cost, so I can pay you by PayPal?
    fr Raymond

    ReplyDelete
  10. price to ship to new zealand please?

    ReplyDelete
    Replies
    1. Sorry I missed your comment. If you are interested in buying the adapter please follow the instructions in this post:

      https://adapting-camera.blogspot.com/2017/08/the-next-generation-of-nikon-1-flash.html

      The V3-F1A is the latest model.

      Delete